Field Measurements
Positive = bracket above belt, Negative = belt above bracket, 0 = level
From center of bracket mounting hole/slot to conveyor frame edge
Total length of guard rail needed. Uses multiple 78\u2033 rails if longer.
Configuration
Default: 1/4″ (6.35mm) ABS
How to join rail segments. 180mm connectors slide into T-slots at joints.
Bolt Spacing
9.0mm through-hole (+ 15mm counterbore, 3mm deep)
Adds vertical support risers behind the panel. Enable if extra rigidity needed.
Force from packages hitting panel (50N ~ 11lbs). For deflection analysis.
MEASUREMENTS
Positioning
Vertical Hole Position ?
Horizontal Gap & Spacer ?
Structural
Deflection & Load Analysis ?
PLANNING
Panels
Panel Layout & Bolt Spacing ?
Rails & Supports
Rail Layout ?
Supports ?
Cost
Materials List ?
Cost Estimate ?
SHOP
Cut List / Shop Sheet ?